Configurazione APN Iliad su Huawei

To configure the Iliad APN on a Huawei device in 2025, you need to manually enter the appropriate settings if they are not automatically detected. These configurations ensure your device can access the internet and MMS services on the Iliad network.

APN Iliad: Settings for Huawei (Android, 5G/4G/LTE Routers and Phones):

• Name: iliad
• APN: iliad
• Username: (leave blank)
• Password: (leave blank)
• MMSC: http://mms.iliad.it
• MMS Proxy: (leave blank)
• MMS Port: (leave blank)
• MCC: 222
• MNC: 50
• Authentication type: (none/blank)
• APN type: default,supl,mms,dun
• APN Protocol: IPv4
• APN Roaming Protocol: IPv4
• Carrier/Porting info, MVNO type: (none/blank unless your SIM provider gives you specific details) ^{[5] [6]}.

How to enter these settings on your Huawei device:

• Go to Settings > Network & Internet > Mobile Network > Access Point Names (APN).
• Tap the “+” (Add) icon to create a new APN.
• Enter the information as listed above.
• Save and select the newly created APN as active.

If you’re using a Huawei router or mobile WiFi, configuration is typically done via the web interface or the Huawei AI Life app. The same APN (“iliad”) should be used, leaving username/password fields blank ^{[1] [5]}.

Note: On many devices, the Iliad APN settings are detected and configured automatically when you insert the SIM. Manual configuration is only necessary if the automatic setup does not work, or if you are using a non-standard device like an IoT module or certain routers ^{[1] [7]}.

If you encounter problems with connectivity after correctly setting up the APN and selecting it, the issue may be related to network coverage or device compatibility rather than the APN parameters themselves ^[6].

These instructions remain valid for Huawei smartphones, tablets, and routers as of mid-2025. Always refer to your device manual or the operator’s official support for the most updated procedures.