Come configurare l'APN sul router?
For configuring a 4G router with Fastweb in 2025, the APN (Access Point Name) to be used is:
- APN: apn.fastweb.it
- Username: (none)
- Password: (none)
- Authentication: none
- IP type: IPv4
- Home page: http://m.fastweb.it
You can set this APN by accessing the router’s management interface, usually at http://192.168.0.1, and entering the configuration under the cellular or mobile network settings. The default password for the admin panel is often admin. This applies to typical Fastweb 4G routers or mobile hotspots using Fastweb SIMs [2] [3] [8] [9].
If you encounter connection issues such as being stuck on 3G instead of 4G, it might be due to router firmware or compatibility problems, as some user reports indicate with certain models (e.g., TP-Link Archer MR550). In such cases, updating the firmware or contacting the router manufacturer for support might be necessary [5].
These APN settings are consistent for 2025, including 4G and 5G configurations, as Fastweb maintains the same APN address for both technologies [7].
In summary:
- Use APN "apn.fastweb.it" with no authentication or username/password.
- Access the router web interface at 192.168.0.1 with admin credentials to configure.
- Check for firmware updates if 4G connection is problematic.
This is the current standard Fastweb APN setup for 4G routers as of 2025 in Italy.