Wi-Fi range amplifiers are useful equipment that will develop your wireless coverage and enable internet reach to every corner of your home or office. To set up and troubleshoot these devices, you need to follow appropriate actions. This article will guide you through configuring, connecting, resetting and troubleshooting a Wi-Fi range extender.
How to Configure Wireless Network on Range Extender
To configure the wireless network on your range extender, first log into its web management page. If you do not know how to do it, please review how to access the web management page of the range extender in question. Go to Settings > Wireless > Connect to Network. Enable connection for 2.4 GHz network and click Wireless Scan to view all available networks. By doing so, your extender is connected successfully with the correct Wi-Fi network and extends it accordingly.
Connecting Your Wi-Fi Range Extender
Open a web browser on either a computer or mobile device connected on your extender’s network in order start the connection process. In case different Wi-Fi network names (SSIDs) are used for router as well as extender, type “www.mywifiext.net” in address field of browser and press Enter button. Follow up with setup instructions carefully hereafter. This smooths out the integration between your extender with the main router’s network whilst ensuring uninterrupted coverage.
Resetting N300 Wi-Fi Range Extender
There could be instances where you may need to reset your Wi-Fi range extender so as to resolve any connectivity problems or reconfigure it again.. Use a pin or paper clip when resetting the N300 one hold down for approximately 10 seconds.. It takes approximately two minutes before this device becomes operational once more…then reconnect it back using WPS button-press WPS buttons of both sides of this bridge (extenders) alongside then press that one at those wireless routers lasting for about 1-3 seconds…You can fix many of these connectivity concerns by going through the process of resetting your extender and restoring it to its default configuration.
Reasons Why Extender is Not Connecting
Check the router link LED on the extender if your extender isn’t connecting. If the link LED is ON, then the extender has been successfully connected to Wi-Fi network of a router. If it is OFF, then it means that this has not been done yet. Confirm that range of router encompasses extender, after which try to reconnect again via WPS button or through web management page. Your connectivity issues will be resolved once you trouble shoot such aspects.
Configuring N300 Wi-Fi Range Extender
Configuration of N300 range extender is simple. Achieve this with one touch setup by pressing the WPS buttons on both DAP-1325 extenders and routers or desired wireless access points. All settings for DAP-1325 are self-configured thus making installation easier than ever before. Through this method of one-touch mechanism, an extender may be rightly set up in order to enhance network signal strength.
These detailed steps help you easily set up, connect and even troubleshoot your Wi-Fi range extender so that you have a strong and reliable wireless network all over your place.