To connect the wireless DUALSHOCK 4 controller to the PS4 console, follow these steps:
- Turn on the PS4 console.
- Connect the controller using a micro USB cable.
- Press the PS button.
You can use the controller in wireless mode by removing the cable when the light indicator turns on.
What to do if the PS4 Controller fails to connect?
If the PS4 controller fails to connect, follow these steps:
- If you hear the second beep sound, press and hold the power button on the PS4 console. Then, release the button.
- Disconnect the controller and the power cable if there is a connection issue with the console.
- Turn off the PS4 for 2-3 minutes.
Why is the joystick not connecting to the PS4?
If the joystick is not working with the PS4, you need to reset the controller. Here’s how:
- Turn off the PlayStation 4.
- Insert a reset button into the small hole near the L2 lever using a pin, and hold it for a few seconds.
Methods to reset the PS4 Controller
To reset the PS4 controller, follow these steps:
- Turn off the PlayStation 4.
- Press and hold the controller’s reset button for 5 seconds to reset it properly.
- Using a USB cable, connect the controller to the console.
- Press the PlayStation button after turning on the console.
What to do if the joystick moves by itself?
Cleaning the analog sticks can solve the issue of the joystick moving by itself. Dust and dirt accumulation can cause this problem.
What should I do if the joystick turns off?
If the joystick flashes and does not turn on, it could be due to a battery or power issue. Try charging the controller for at least thirty minutes or even two hours if it hasn’t been used for a long time or if it is completely discharged.
How to reset a joystick afterward?
The reset button is located in a small hole on the back of the controller near the L2 button. Use a paperclip to press and hold the Reset button for a few seconds (7-12 seconds). This should be enough to reset the controller.
What does it mean when the PS4 controller turns off?
The white light that illuminates on the PS4 controller primarily indicates two concepts: the need to recharge the batteries or try replacing them with those from another controller if the battery is low. Although the PS4 controller attempts to connect to the PlayStation 4, it fails.
How to update the PlayStation 4 joystick?
Insert the USB drive into a USB port on the controller’s table. The controller will automatically detect the firmware file and display the right screen. Click the "Go to the update manager" button. You can choose to wait before installing the update.
How to stop a controller from vibrating?
Go to Accessibility, Controller, and Vibration settings. If you have multiple controllers, choose the one you want to modify and click Configure.