To modify the administration password of your NETGEAR router, follow these steps:
- Open a web browser on a computer or mobile device connected to the router’s network.
- Click on the address bar and enter the router’s username and password.
- Choose the "ADVANCED" option, then select "Administration".
- Set a new password for the administration settings.
To connect a TP LINK Extender with a modem, you can follow these steps:
- Activate the WPS feature on your router by pressing the button on the extender.
- Within two minutes, the devices will connect to your Wi-Fi network with extended coverage after the TP-Link network disappears.
To install the TP LINK Wi-Fi Range Extender using WPS:
- If your router supports this technology, press the WPS button on the modem (sometimes displayed as two circular arrows).
- Within two minutes, press the connection button on the extender (sometimes displayed as a lock with Wi-Fi waves on the sides).
To connect a Netgear extender to the modem and configure it, follow these steps:
- Add the extender to your network.
- Connect your computer or mobile device to the extender’s Wi-Fi network.
- Open a web browser and go to mywifiext.net.
- Click or tap on "NEW EXTENDER SETUP".
To access the Fastweb FASTGate router, follow these steps:
- While connected to the modem, open a web browser and enter the address http://myfastgate/.
- Once the page loads, enter your login credentials to access the control panel.
To access your Fastweb router, follow these steps:
- After typing 192.168.1.254, press Enter.
- Enter your username and password.
- Use the following data for the initial login to the modem: Password for Fastweb: leave it blank.
- On the configuration page, look for "Home Network" just below the Wireless option.
To activate the WPS feature on the Fastweb NeXXt modem, follow these steps:
- Press both Fastweb buttons for 3 seconds and the volume increase button.
To change the IP address of your Wi-Fi network, follow these steps:
- Go to the settings and long-press on the network connection icon.
- Click on the "Edit" button to access the address modification functions.
To identify the router’s IP address using the command prompt, follow these steps:
- Type "ipconfig".
- The "Default Gateway" entry includes the IP address of your router.
On Android, to access the router’s control panel:
- Go to the Settings menu.
- Select "Network & Internet" and then "Wi-Fi".
- Next to the connected Wi-Fi network, click on the gear icon.
- Click on "Advanced" and you will see the router’s IP address next to the Gateway entry.