Cosa fare se il joystick si muove da solo?

di

Perché il mio joystick si muove da solo?

Le cause che possono portare al drift sono molteplici. Si va da umidità e polvere nell'ambiente a una pulizia troppo blanda del dispositivo, tutti fattori che possono compromettere il funzionamento interno del vostro pad.
Leggi di più su www.playstationbit.com

Cleaning the Analog Sticks and Drift Fix

To fix the issue of joystick not working properly, you can try cleaning the analog sticks. The main cause of this problem is the accumulation of dust and dirt. So, cleaning the analog sticks can sometimes solve the issue of autonomous controller. Here’s what you can do:

  1. Clean the analog sticks by removing any dust or dirt.

  2. Check if the joystick is charging properly. If not, try the following steps:

    • Ensure that the charging cable is connected correctly.
    • Try using an alternative USB cable.
    • Connect the USB cable to a different device other than your PS4.
    • Check and clean the charging port of the controller.
    • Reset the PS4 controller.
    • Connect the PlayStation 4.

Troubleshooting if the Joystick Doesn’t Turn On

If the joystick doesn’t turn on, you can try resetting the controller. Near the L2 button on the back of the Dualshock 4 controller, there is a small reset button. Press and hold it for a few seconds using a toothpick or a needle. As a last resort, try holding down the PS button for 10-15 seconds.

Resetting the Aim Controller

To reset the Aim controller, follow these steps:

  1. When the PS4 LED starts flashing slowly, press and hold the Touchpad button for 5 seconds, then release it.
  2. Next, click any of the PS4 controller buttons that you want to reset.
  3. The LED will flash to confirm the button registration.

Updating the PS4 Joystick

To update the firmware of your PS4 joystick, follow these steps:

  1. Insert the USB drive into the USB port of the controller.
  2. The controller will automatically detect the firmware file and display the update screen on the right.
  3. Click the button to access the Update Manager.
  4. You can choose to wait before installing the update.

Understanding Joystick LED Indicators

The joystick LED indicator usually flashes white when the controller is unable to connect to the console or when the battery is low. Here are some simple actions you can take to resolve the issue:

  • When the PS4 joystick flashes yellow, it means the PS4 is in rest mode or turned off, and the controller has just been connected to charge.
  • When the yellow flashing occurs on the joystick, it indicates that the joystick battery is low. To resolve the issue, fully charge the battery for three hours until the battery LED turns green.

Using the Joystick on a Phone

To use the joystick on your phone, follow these steps:

  1. Enable Bluetooth on your device by accessing the Bluetooth settings.
  2. Start scanning for new devices and choose the controller from the list.
  3. Once paired, a solid colored light will illuminate the light bar.

Connecting the Controller without a Cable

To connect a DualShock controller via Bluetooth, hold down the PS and Share buttons until the light goes off.

Troubleshooting Joystick Charging Issues

If the joystick is not charging, try the following steps to fix it:

  • Check the charging cable.
  • Try using an alternative USB cable.
  • Connect the USB cable to a different device other than the PS4.
  • Inspect and clean the controller’s charging port.
  • Reset the PS4 controller.
  • Increase the PS4 power.

Updating the PS4 Joystick

To update the firmware of your PS4 joystick, follow these steps:

  1. Insert the USB drive into a USB port on the controller.
  2. The controller will automatically detect the firmware file and display the update screen on the right.
  3. Click the "Go to Update Manager" button.
  4. You can choose to wait before installing the update.

Understanding Yellow Flashing on the Joystick

When the yellow flashing occurs on the joystick, it means the joystick battery is low. To resolve the issue, fully charge the battery for three hours until the battery LED turns green.

Was this article helpful to you?

Come risolvere il problema del drifting?
Soffiate sullo stick difettoso Il drifting potrebbe essere causato da qualche granello di polvere incastrato nei bordi dello stick analogico del DualSense di PlayStation 5. Provate quindi a soffiare sul componente mentre lo ruotate: è possibile che il problema si risolva in questo modo.
Come togliere lo stick drift?
Utilizza una pinzetta o le dita per tirare il nastro arancione. Rimuovi la vite da 6,4 mm utilizzando un cacciavite a croce Phillips #00. Solleva la staffa della batteria.
Come si resetta il joystick?
Nella parte posteriore del controller è presente un piccolo foro, il tasto di ripristino si trova all'interno del foro. Con l'aiuto di una graffetta (o un oggetto simile) tieni premuto il tasto di ripristino per almeno cinque secondi.

Lascia un commento