Come caricare iPhone con cavo non originale?

A certified MFi cable is the only safe way to charge an iPhone battery with a non-original charger. Therefore, how to repair an iPhone cable? Repairing an iPhone cable is simple:

1. Try bending the plug.
2. Connect the iPhone to a computer or any other USB charger.
3. Purchase certified cable and charger.
4. Change the USB cable.

Therefore, how can I repair a lightning cable? Electrical tape is the immediate solution. You can repair the electrical wires, and it works well for damaged cables. The process is completed by wrapping the tape around the "problematic" area.

Consequently, how can I connect a USB cable? Connecting two USB cables together is simple:

1. Cut the ends that you want to insert into the two cables.
2. Take a long heat shrink tube that covers the joint and position it on one side of the cable.
3. Slide the heat shrink tube over the wires after joining them.

What happens if I use a non-original charger to charge an iPhone? If the non-original charger for the iPhone is produced by a reliable company specializing in the production of compatible smartphone accessories, it will not damage the smartphone’s battery or cause the phone to explode. Therefore, it is a myth that a non-original charger can cause damage.

What happens if I use a different cable than the original one? Non-original cables, however, the circuits of a cable can be damaged by an inadequate or poorly constructed cable, with a series of notable symptoms such as:

1. No backups: The charge does not start even though the cable is plugged in.
2. How can I charge the phone if the cable input is damaged? After turning off the phone, lift the back cover. Then, remove the battery and insert it into the external charger you purchased, making sure the charging poles are compatible. After that, plug the charger into the power source and wait for it to charge.

In addition, people ask: How to prevent iPhone cable breakage? Strengthening the cable by inserting it into a spring is one of the most common methods. The perfect spring is inside pens; just disassemble a classic representative pen, which is often found as a gift in stores and conferences, and extract the spring from inside. So, how much does an iPhone charger cost? €7.90.

There are eight options for the original Apple charger for iPhone, starting at €7.90 with the 1A charger and the original Apple Lightning cable. Charging the phone is easy with this charger. The 1-meter Lightning cable allows for data transfer and charging.

How does the Lightning connector work? The Lightning connector is a complete digital connector with eight pins, with the metal shell as the ninth ground connector. This plug, unlike the previous connector, allows for insertion into the device in both directions.

Consequently, when does the charger not work properly? In 90% of cases, a battery that does not charge is due to crumbs or accumulated dust inside. In any case, the factor can also be of external origin. In fact, a broken or faulty USB cable prevents charging.

How many wires does a USB cable have? Typically, a full USB cable consists of four copper wires: charging occurs through two wires, and data is transmitted through two wires.

What happens if I use a charger with a higher power? The charging speed decreases or increases with the difference in intensity. There is no risk of damaging the battery by using a higher amperage but with the same voltage indicated by the manufacturer.

In addition, people ask: How can I recognize an original Samsung charger? In general, the original Samsung charger is made of high-quality plastic, has no irregular edges, and the external information is printed clearly and legibly, and the USB connectors work well.