Come giocare con il controller Xbox 360 su PC?

Come collegare l'Xbox 360 al PC?

Per procedere, ti basta semplicemente collegare la console al monitor che usi anche per il tuo computer tramite cavo HDMI. In parole povere, tutto avviene come se si trattasse di un TV. Si prende il cavo HDMI in uscita dalla Xbox e si connette alla relativa porta del monitor, in genere posta sul retro.
Leggi di più su www.aranzulla.it

To connect an Xbox 360 controller to your PC, follow these steps:

  1. Make sure to connect the cable or kit to the designated input on the controller.
  2. Insert the USB end of the cable into your computer and press the Guide button on the controller to turn it on.
  3. The necessary drivers should be recognized and installed automatically in a very short time.

If you want to connect an Xbox 360 controller to your PC without using a receiver, you will need to purchase an adapter if you don’t have a wireless receiver. The adapter can be connected to the computer through a USB 2.0 port. You can use the USB ports on the back of your computer if the front is not available.

If the Xbox 360 controller is not functioning properly, you may need to replace it. The Support and Repair Devices page offers the option to order a replacement controller. However, before you can request a warranty replacement for a controller, you need to register the console.

To connect the Xbox 360 controller to a Windows 10 computer using a cable, follow these steps:

  1. Connect the controller to the computer using the USB cable.
  2. First, insert the smaller connector of the connection cable into the communication port of the controller.
  3. Next, connect the other end of the cable to a USB port on the computer.

To connect the Xbox 360 controller to your PC via Bluetooth, follow these steps:

  1. Go to the settings and choose "Devices".
  2. After adding Bluetooth or another device, select another option and click on "Wireless Controller for Xbox".
  3. Finally, choose "Done".

To connect the Xbox 360 to your laptop computer monitor, follow these steps:

  1. Connect the console to the monitor and your computer using an HDMI cable.
  2. In other words, it is done just like connecting it to a television.
  3. You need to get the HDMI cable from the Xbox and connect it to the appropriate monitor port, which is usually located on the back of the monitor.

To connect the Xbox 360 controller to your phone without a cable, follow these steps:

  1. Activate Bluetooth on both the controller and your smartphone.
  2. Assume that this type of protocol is accessible to the controller.
  3. The controller has a black button next to L and LT. Press it to activate.

To calibrate the Xbox 360 joystick, follow these steps:

  1. Select the console.
  2. Hold down the Guide button on the controller until it turns on.
  3. Release the connection button on the console after picking it up.
  4. Within twenty seconds, press the controller’s connection button and release it.

To make the joystick work on your computer, follow these steps:

  1. Connect the joystick to the PC with a cable and a USB port.
  2. Then go to the control panel, click on "Game Controllers", and choose "Add".
  3. This is the stage where the joystick should be configured and ready to be used to play your favorite games.

If the joystick is not working, try the following:

  1. If you remove this cable, the micro-USB port and the battery are not connected, and the joystick does not work because it is not charging.
  2. Make sure that all other cables are inserted correctly and fix any that may have come loose.
Come si collega joystick Xbox 360?
Accendi la console. Tieni premuto il pulsante Guida  sul controller fino all'accensione. Premi e rilascia il pulsante di connessione sulla console. Entro 20 secondi, premi e rilascia il pulsante di connessione sul controller.
Come connettere il controller Xbox al PC?
Sul PC, premi il pulsante Start  e seleziona Impostazioni >, Dispositivi. Verifica che il Bluetooth sia attivato, quindi scegli l'opzione relativa a Bluetooth o altro dispositivo. Seleziona Bluetooth e scegli Xbox Adaptive Controller dall'elenco.
Come faccio a far funzionare il joystick al PC?
Nella maggior parte dei casi, i controller “generici” dotati di cavo vengono riconosciuti in automatico da Windows (e, se dotati di apposita certificazione, anche da macOS): è sufficiente collegare l'estremità USB del cavo al computer e il gioco è fatto.

Lascia un commento